Media

20220403_194106

invalid@example.com (Jerrod) — Mon, 04 Apr 2022 01:09:20 +0000

Removed the bed sides

invalid@example.com (Jerrod) — Fri, 05 Mar 2021 23:11:25 +0000

After new suspension and steering

invalid@example.com (Jerrod) — Wed, 01 Jul 2020 03:11:19 +0000

Finally got the hood valance and cowl painted

invalid@example.com (Jerrod) — Sat, 02 May 2020 11:48:01 +0000

Vinyl floor and seat cover is in

invalid@example.com (Jerrod) — Sat, 02 May 2020 11:39:27 +0000

New lce street header kit DUI wires and loom kit also rerouted the distributor power wires with the alternator wires Egr delete

invalid@example.com (Jerrod) — Sat, 02 May 2020 03:36:47 +0000

Carbs on still needs some wires removed and i need to make a mount for fuel regulator on side of intake below the pump

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:53:14 +0000

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:50:40 +0000

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:48:01 +0000

Rebuilt knuckles and bearings 2019

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:46:28 +0000

Built the exo cage wanted to keep it real simple as it also has an internal cage

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:44:57 +0000

Also swapped stock tcase for new 4.7 low range

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:43:08 +0000

Used a piece of the doner trucks flatbed floor 10ga. Added a cutout for toolbox in bed floor. 11 gal aluminum tank 2018

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:39:50 +0000

I put these shock mounts on the front 2015

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:38:30 +0000

Cutout these shock hoops for one i made to fit under bed floor

invalid@example.com (Jerrod) — Thu, 23 Apr 2020 20:37:16 +0000

I rolled it offroad at the badlands 2015ish replaced with this cab in 2018